Walnut Creek
Community Group Pressure Washing Offer
Pressure Washing Order Form
Deadline: April 6, 2017
Example SOR before and after photos available below the form.
We will contact you the week of April 10 with your service date and preparation instructions. Instructions are also shown at the bottom of this page. After the work has been completed, you will receive an emailed invoice, which is due within 7 days. Should you have any questions, please feel free to contact us at sales@southernoutdoorrestoration.com. Thank you for your consideration!
SOR example concrete washing
Preparation Instructions
FAQ:
Do I need to be home? No, but please do make sure your windows and doors are securely closed and follow the preparation instructions below.
Will this process damage my home? No. We use a low pressure process described below. We do have some disclaimers, especially for areas that are damaged prior to our arrival. Please read them thoroughly (below).
PREPARATION: Please help us ensure the best wash result possible by temporarily removing ALL potted plants, grills, cloth furniture, electronics, and breakable décor away from your siding and entrances so that the technician may easily access all areas he is to clean. We ask that you keep your windows securely closed.
Please complete preparations prior to 8 AM on your scheduled wash day. (Our technicians generally complete work between 8 AM and 4 PM and your schedule may vary.)
INFORMATION: Our process: we will first apply our biodegradable mildewcide solution to all facades of the home at a low pressure. Afterward, we will complete a full fresh-water rinse to ensure a uniform finish. The mildewcide will kill the gray and green spores of the mildew and prevent them from returning 4-5 times longer than if we used any high-pressure techniques to remove the growth.
DISCLAIMERS:
- Unless otherwise specified, our wash process will not remove rust stains, efflorescence, calcium/lime build up, graffiti, vinyl oxidation, artillery fungus, or tar/asphalt stains on gutter faces and other surfaces.
- Cracked, faded, peeling paint, loose masonry, and/or rotten wood may be exposed during the wash process but is not caused by the work we complete.
We complete our work under the following assumptions:
- Windows and Doors are securely sealed and closed.
- Double pane windows have intact thermal seals.
- Electrical outlets and fixtures are wired to code, grounded properly, and GFCI protected.
- Paint does not contain any organic dyes that will react to the sodium hypochlorite in our mildewcide solution.
SOR cannot be held responsible for damages, labor, or material costs for rectifying any of the above situations.
FAQ:
Do I need to be home? No, but please do make sure your windows and doors are securely closed and follow the preparation instructions below.
Will this process damage my home? No. We use a low pressure process described below. We do have some disclaimers, especially for areas that are damaged prior to our arrival. Please read them thoroughly (below).
PREPARATION: Please help us ensure the best wash result possible by temporarily removing ALL potted plants, grills, cloth furniture, electronics, and breakable décor away from your siding and entrances so that the technician may easily access all areas he is to clean. We ask that you keep your windows securely closed.
Please complete preparations prior to 8 AM on your scheduled wash day. (Our technicians generally complete work between 8 AM and 4 PM and your schedule may vary.)
INFORMATION: Our process: we will first apply our biodegradable mildewcide solution to all facades of the home at a low pressure. Afterward, we will complete a full fresh-water rinse to ensure a uniform finish. The mildewcide will kill the gray and green spores of the mildew and prevent them from returning 4-5 times longer than if we used any high-pressure techniques to remove the growth.
DISCLAIMERS:
- Unless otherwise specified, our wash process will not remove rust stains, efflorescence, calcium/lime build up, graffiti, vinyl oxidation, artillery fungus, or tar/asphalt stains on gutter faces and other surfaces.
- Cracked, faded, peeling paint, loose masonry, and/or rotten wood may be exposed during the wash process but is not caused by the work we complete.
We complete our work under the following assumptions:
- Windows and Doors are securely sealed and closed.
- Double pane windows have intact thermal seals.
- Electrical outlets and fixtures are wired to code, grounded properly, and GFCI protected.
- Paint does not contain any organic dyes that will react to the sodium hypochlorite in our mildewcide solution.
SOR cannot be held responsible for damages, labor, or material costs for rectifying any of the above situations.
Thank you for your business!
